Rode VideoMic GO Lightweight On-Camera Microphone – VMGO
The VideoMic GO is extremely user-friendly as there’s no switches or battery to worry about – just plug in and go. All microphones need power however, and in the case of the VideoMic GO it is drawing a very small voltage commonly referred to as “plug-in power” from your camera (or recording device) via the audio cable. Plug-in power has long been a standard for camera manufacturers, and so the VideoMic GO is compatible with the vast majority of cameras in the market. While this is by no means a complete list, following is a list of cameras that we can confirm do not support the VideoMic GO. Please refer to the specifications of your particular camera for information on whether it supplies power via the microphone jack: Nikon D7000, Canon T3/1100D, Canon C100, C300, C500, Canon VIXIA HFR500, Canon VIXIA HFG20, HFG30, Canon XA-10, Canon Vixia G10, Canon Legria HF G25.
If you are experiencing issues getting your VideoMic GO to operate with a camera not listed above, firstly be sure to update your camera’s firmware to the latest version (available from your camera manufacturer’s website). Sensitivity -35.0dB re 1 Volt/Pascal (17.80mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Lightweight Design – At only 73gm (2.5oz) it’s RODE’s lightest on-camera microphone.
Integrated Rycote Lyre – Hard wearing and super-effective isolation from bumps and vibration.
No Battery necessary – With the camera’s plug-in power all you need to do is plug in and GO.
Ideal for Camcorders, point & shoot, entry-level DSLR
Not compatible with: Nikon D7000, Canon T3/1100D, Canon C100, C300, C500, Canon VIXIA HFR500, Canon VIXIA HFG20, HFG30, Canon XA-10, Canon Vixia G10, Canon Legria HF G25.All of the microphones in the VideoMic range have a standard thread built into the bottom of the cold shoe mount for connection to a boompole, mic stand or tripod
$118.87
Price: $118.87
(as of Apr 28, 2024 18:03:25 UTC – Details)
The VideoMic GO is extremely user-friendly as there’s no switches or battery to worry about – just plug in and go. All microphones need power however, and in the case of the VideoMic GO it is drawing a very small voltage commonly referred to as “plug-in power” from your camera (or recording device) via the audio cable. Plug-in power has long been a standard for camera manufacturers, and so the VideoMic GO is compatible with the vast majority of cameras in the market. While this is by no means a complete list, following is a list of cameras that we can confirm do not support the VideoMic GO. Please refer to the specifications of your particular camera for information on whether it supplies power via the microphone jack: Nikon D7000, Canon T3/1100D, Canon C100, C300, C500, Canon VIXIA HFR500, Canon VIXIA HFG20, HFG30, Canon XA-10, Canon Vixia G10, Canon Legria HF G25.
If you are experiencing issues getting your VideoMic GO to operate with a camera not listed above, firstly be sure to update your camera’s firmware to the latest version (available from your camera manufacturer’s website). Sensitivity -35.0dB re 1 Volt/Pascal (17.80mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Lightweight Design – At only 73gm (2.5oz) it’s RODE’s lightest on-camera microphone.
Integrated Rycote Lyre – Hard wearing and super-effective isolation from bumps and vibration.
No Battery necessary – With the camera’s plug-in power all you need to do is plug in and GO.
Ideal for Camcorders, point & shoot, entry-level DSLR
Not compatible with: Nikon D7000, Canon T3/1100D, Canon C100, C300, C500, Canon VIXIA HFR500, Canon VIXIA HFG20, HFG30, Canon XA-10, Canon Vixia G10, Canon Legria HF G25.All of the microphones in the VideoMic range have a standard thread built into the bottom of the cold shoe mount for connection to a boompole, mic stand or tripod
There are no reviews yet.